Configuring The Network Interface Board - Ricoh DSc332 Operating Instructions Manual

❖ ❖ ❖ ❖ *5 Output Tray: Status
Status
Normal
Paper In
Full
Error

Configuring the Network Interface Board

The network interface board settings can be displayed using the commands be-
low.
• telnet : Use the "show" command. See p.101 "Network interface board config-
uration settings information".
Item name
Common
Mode
Protocol Up/Down
AppleTalk
TCP/IP
NetWare
SMB
*1
IP over 1394
*1
SCSI print
Ethernet interface
Syslog priority
NVRAM version
Device name
Comment
Location
Contact
Soft switch
----
There is paper in the output tray.
Output tray is full of paper.
Other error
Meaning
"Up" means active; "Down" means inactive.
Internal version number
Internal version number
Understanding Displayed Information
Description
9
125