Table of Contents
Advertisement
TRENDnet User's Guide
Check the router system information
Advanced Setup > System > Status
You may want to check the system information of your router such as WAN (Internet)
connectivity, wireless and wired network settings, router MAC address, and firmware
version.
1. Log into your router management page (see "Access your router management page"
on
page
16).
2. Click on Advanced Setup and click on System. Then click on Status.
3. Review the device information.
WAN (Internet) Information
•
Connection Type – Displays the WAN (Internet) connection type.
•
WAN IP – The current IP address assigned to your router WAN port or interface
configuration.
•
Subnet Mask - The current subnet mask assigned to your router WAN port or
interface configuration.
•
Gateway – The current gateway assigned to your router WAN port or interface
configuration.
© Copyright 2012 TRENDnet. All Rights Reserved.
•
DNS (Domain Name System) – The primary DNS address assigned to your
router port or interface configuration.
•
Secondary DNS – The secondary DNS address assigned to your router port or
interface configuration.
•
Cable/DSL – Displays the current WAN (Internet) connection status. When
using DHCP Client (or Dynamic IP address) Internet connection type, you will
provide the option to Release and Renew your IP address settings.
Other Internet connection types such as PPPoE will provide the option to
Connect and Disconnect.
Wired LAN Information
•
IP Address - Displays your router's current IP address.
•
Subnet Mask – Displays your router's current subnet mask.
•
DHCP Server - Display your router's DHCP server status, enabled or disabled,
and provides a link to the DHCP client listing.
TW100-BRF214
41
Advertisement
Table of Contents
