Domain/Url Filters - TRENDnet TW100-BRF214 User Manual

TRENDnet User's Guide
4. Once you have added all of the MAC addresses to the MAC Address Control List,
review the MAC Address Control options and select the option to apply.
Note: Do not configure this setting until you have added the MAC addresses to the MAC
Address Control List first. The recommended option is to only Deny all to pass except the
following MACs which will only allow the MAC addresses listed in the MAC Address
Control List and deny all others devices that are unlisted.
•
MAC Address Control
Enable - Check the option to enable the MAC address control feature.
o
If this option is unchecked MAC address control will be disabled.
Allow all to pass except the following MACs – Selecting this option
o
will allow all other devices access to your network and only deny the
device MAC addresses listed in the MAC Address Control List.
Deny all to pass except the following MACs – Select this option will
o
deny all other devices access to your network and only allow the
device MAC addresses listed in the MAC Address Control List.
5. Click Apply at the bottom of the page to apply the changes. After the settings have
been applied, click Continue on the following page.
Note: If you would like to discard the changes, click Cancel before you click Apply.
© Copyright 2012 TRENDnet. All Rights Reserved.

Domain/URL Filters

Advanced Setup > Firewall > URL Filter
You may want to block computers or devices on your network access to specific
websites (e.g. www.trendnet.com, etc.), also called domains or URLs (Uniform Resource
Locators). You may also enter a keyword (e.g. instead of complete URL to generally
block computers or devices access to websites that may contain the keyword in the URL
or on the web page.
1. Log into your router management page (see "Access your router management page"
on page 16).
2. Click on Advanced Setup and Firewall, then click on URL Filter.
3. Review the Domain/URL blocking settings.
• URL filter function – Select Enabled to enable URL filtering on your router.
Selecting disabled will disable the URL filtering function on your router.
•
Add URL - Enter the Website/URL/domain (e.g.www.trendnet.com) or keyword
(e.g. trendnet) to block access.
TW100-BRF214
14