Table of Contents
Advertisement
TRENDnet User's Guide
Configure your router log
Advanced Setup > System > Log Setting
You may want send your router log to your e-mail address or to an external log server
(also known as Syslog server) so you can check it periodically while away from home.
You may also want to only see specific categories of logging.
Send router logs to your e-mail address
1. Log into your router management page (see "Access your router management page"
on
page
16).
2. Click on Advanced Setup and click on System, then click on Log Setting.
3. Under the Settings section, click the Email Log option.
4. Review the e-mail log settings.
© Copyright 2012 TRENDnet. All Rights Reserved.
•
Send Email – Click
using your email settings.
•
Sender Email Address – Enter a sender e-mail address. (e.g.
router@trendnet.com)
Note: This does not need to be real e-mail address, only used for identification
purposes when checking your e-mail.
•
Receiver Email Address – Enter your e-mail address or the email address you
would like to send the log file.
•
SMTP Server – Enter the IP address (e.g. 10.10.10.10) or domain name (e.g.
mail.trendnet.com) of your e-mail server.
•
Enable Authentication – Check this option if your e-mail service requires
authentication. Otherwise, if your e-mail service does not require
authentication, leave this option unchecked.
Note: If you are unsure of this setting check with your e-mail service provider if
authentication is required.
•
Account Name – For authentication, enter your account user name for your e-
mail service.
•
Password – For authentication, enter your password for your e-mail service.
•
Re-type Password – For password confirmation, re-enter your password for
your e-mail service.
Note: The port used for SMTP is the default TCP/UDP port 25.
5. Click Apply at the bottom of the page to apply the changes. After the settings have
been applied, click Continue on the following page.
Note: If you would like to discard the changes, click Cancel before you click Apply.
TW100-BRF214
to send a test e-mail with the current router log
43
Advertisement
Table of Contents
