Table of Contents
Advertisement
TRENDnet User's Guide
•
Lease Time – Click the drop-down list to select the lease time.
Note: The DHCP lease time is the amount of time a computer or device can keep
an IP address assigned by the DHCP server. When the lease time expires, the
computer or device will renew the IP address lease with the DHCP server,
otherwise, if there is no attempt to renew the lease, the DHCP server will
reallocate the IP address to be assigned to another computer or device.
•
Local Domain Name (optional) – Specifies a domain name to assign to
computers or devices. (e.g. trendnet.com)
4. Click Apply at the bottom of the page to apply the changes. After the settings have
been applied, click Continue on the following page.
Note: If you would like to discard the changes, click Cancel before you click Apply.
You can view the list of active lease entries for computers or devices that have been
assigned IP addresses automatically from the DHCP server on your router by clicking
DHCP Client List in the left-hand panel. You can click Refresh to refresh the list.
© Copyright 2012 TRENDnet. All Rights Reserved.
Set up DHCP reservation
Advanced Setup > LAN > DHCP Client List
DHCP (Dynamic Host Configuration Protocol) reservation (also called Static DHCP) allows
your router to assign a fixed IP address from the DHCP server IP address range to a
specific device on your network. Assigning a fixed IP address can allow you to easily
keep track of the IP addresses used on your network by your computers or devices for
future reference or configuration such as virtual server (also called port forwarding or
port mapping, see "Virtual Server" on
applications (also called port triggering, see "Special Applications" on
1. Log into your router management page (see "Access your router management page"
on
page
16).
2. Click on Advanced Setup and click on LAN, then click on DHCP Client List.
3. You can choose one of the following options to assign a DHCP reservation
You can select from the list of active lease entries for computer or devices that
have been assigned IP addresses automatically from the DHCP server on your
router. To set the IP address currently used to a static DHCP reservation, check
the Static option next to the entry.
•
Host Name – Name of the computer or network device.
•
IP Address – The IP address currently assigned to the computer or network
device.
•
MAC Address – The MAC (Media Access Control) address of the computer or
network device.
•
Remaining Time – The remaining lease time of the IP address assigned.
•
Static – If checked, assigns the current IP address to the computer or network
device as a DHCP Reservation.
TW100-BRF214
page 27
or "Port Mapping" on page) or special
page
28).
20
Advertisement
Table of Contents
