Table of Contents
Advertisement
TRENDnet User's Guide
MAC address filters
Advanced Setup > Firewall > MAC Control
Every network device has a unique, 12-digit MAC (Media Access Control) address. Using
MAC filters, you can allow or deny specific computers and other devices from using this
router's wired or wireless network.
1. Log into your router management page (see "Access your router management page"
on
page
16).
2. Click on Advanced Setup and click on Firewall, then click on MAC Control.
3. Add the MAC addresses to the MAC Address Control List first before applying the
MAC filter function.
Note: MAC filter can be configured to allow access to the listed MAC addresses and
deny all others unlisted or vice versa. The recommended function is to choose to only
allow access to the MAC addresses listed and deny all others unlisted because it is easier
to determine the MAC addresses of devices in your network then to determine which
MAC addresses you do not want to allow access.
To add MAC addresses to the MAC Address Control List, you can choose to add MAC
addresses by manually typing the address in manually or selecting a MAC address from
your router's DHCP client list.
•
Add MAC Address - Enter the 12-digit MAC address in the fields provided .
(e.g. 00-11-22-AA-BB-CC)
OR
© Copyright 2012 TRENDnet. All Rights Reserved.
•
DHCP Client - Click the DHCP Client drop-down list and select the MAC
address you would like to add. After you select the MAC address, click Clone to
copy the MAC address to the Add MAC Address fields.
Note: You can also check the router DHCP List for the MAC addresses of the
devices on your network, see "Setup the DHCP server on your router" on
19
or refer to your computer or device documentation to find the MAC address.
4. Click Apply at the bottom of the page to add the address to the MAC Address Control
List. After the settings have been applied, click Continue on the following page.
Note: If you would like to discard the changes, click Cancel before you click Apply.
To verify that the MAC address is added, the MAC address entry should appear in the
MAC Address Control List.
Note: To delete a MAC address from the MAC Address Control list, click Delete next to
the entry. Then click Apply at the bottom of the page to apply the changes and after the
changes have been applied, click Continue on the following page.
TW100-BRF214
page
13
Advertisement
Table of Contents
