Check The Router Status Information - TRENDnet TEW-829DRU User Manual

TRENDnet User's Guide

Check the router status information

Status > Overview
You may want to check the system information of your router firmware, S/N, uptime,
available memory, active connection, WAN interface information, wireless interface
information, DHCP clients, connected wireless clients, dynamic DNS and active UPnP
entries.
1. Log into your router management page (see
on page 8).
2. Click on Status and click on Overview.

System
o
Hostname – Displays the currently assigned hostname of the router.
The name other network devices identify the router on the network.
o
Firmware Version – Displays the currently loaded firmware version
and date.
o
Serial Number – Displays the device serial number.
o
Local Time – Displays the current device time and date.
o
Uptime – Displays the total amount of time the router has been up
and running without reboot.
o
Load Average – Displays the CPU load average of the device over the
following time intervals. (one minute load avg., five minute load avg.
fifteen minute load avg.)
© Copyright 2018 TRENDnet. All Rights Reserved.
"Access your router management page"

Memory
o
Total Available – Displays the total amount of RAM memory available
on the router regardless of usage.
o
Firmware Version – Displays the total amount of free space RAM
memory available on the router.
o
Buffered – Displays the total amount of RAM memory used for buffer
memory.

Network
o
WAN1/WAN2 – Displays the current configuration of the WAN
interfaces along with the IPv4/IPv6 address information and
connected uptime.
o
Active Connections – Displays the current amount of active Internet
sessions.
TEW-829DRU
96