Table of Contents
Advertisement
TRENDnet User's Guide
5. Click OK at the bottom of the page to apply the changes. After the settings have been
applied, click Continue on the following page.
Note: If you would like to discard the changes, click Cancel before you click OK.
DSCP Based
Advanced Setup > QoS > Port Based
The DSCP based QoS feature allows you to configure DSCP (Diffserv) QoS parameters for
the purpose of end-to-end QoS prioritization working together with other devices on
your network that support DSCP. Configuration of this feature requires that the user
have more advanced knowledge of DSCP (Differv) QoS prioritization.
1. Log into your router management page (see "Access your router management page"
on
page
16).
2. Click on Advanced Setup and click on QoS, then click on DSCP Based.
3. Under Settings, check the Enable DSCP option to enable DSCP based QoS.
3. Review the DSCP based QoS settings and apply the settings accordingly.
© Copyright 2012 TRENDnet. All Rights Reserved.
•
Queue weight (High, Medium, Low) – For each weight, enter the weights
according to the overall DSCP QoS configuration of your network devices.
•
Enable Rule – Check the option to enable the DSCP based QoS rule to apply
traffic prioritization.
•
DSCP Value – Enter the DSCP value for the rule.
•
Queue Map – Select a priority queue weight from the drop-down list to apply
to the rule.
•
Description – Enter a brief description to make the rule more easily identifiable
to it's purpose. Click Add and it will appear in the Rules Listing table. Click OK to
save the changes.
•
Rules Listing Table – After DSCP rules are added they will appear in this table.
To modify an entry, under Action, click the notepad icon next to the entry and
the information will populate the fields provided. After modifying the entry,
click Modify. To delete an entry, under Action, click the trash icon. Click OK to
save the changes.
4. Click Add to add the DSCP entry to the list.
5. Click OK at the bottom of the page to apply the changes. After the settings have been
applied, click Continue on the following page.
Note: If you would like to discard the changes, click Cancel before you click OK.
To modify an entry, next to the entry under Action in the list, click the notepad icon
and the DSCP fields will populate with the settings of the entry. Modify the settings and
click Modify
. Then click Apply at the bottom of the page.
To delete an entry, next to the entry under Action in the list, click the trash icon
and click Apply at the bottom of the page.
TW100-BRF214
31
Advertisement
Table of Contents
