TRENDnet TW100-BRF214 User Manual page 29

4-port fast ethernet firewall router
Hide thumbs Also See for TW100-BRF214:
Table of Contents

Advertisement

TRENDnet User's Guide
5. In the DMZ Host field, enter the IP address you assigned to the computer or network
device to expose to the Internet. (use last IP address number such as 192.168.10.101)
The entry will appear in the list when it has successfully been added.
6. Click Apply at the bottom of the page to apply the changes. After the settings have
been applied, click Continue on the following page.
Note: If you would like to discard the changes, click Cancel before you click Apply.
Public IP drop-down list
If you have a dynamic IP WAN/Internet connection, then the Public IP drop-down list
will only list the single IP address assigned to you by your ISP and you will only have one
IP address available at any given time for these Internet connection.
Note: You will only be able to specify assign multiple DMZ public IP entries when using
the Static IP WAN Internet connection type.
If you have a static IP WAN/Internet IP connection type, the Public IP drop-down list will
have your static IP address listed.
Contact your ISP for details if you have more than one static public IP address available.
If your ISP has assigned you with multiple static IP addresses and you would like to add
multiple static WAN public IP addresses:
a. Log into your router management page (see "Access your router management page"
on
page
16).
b. Click on Advanced Setup and click on WAN, then click on Static IP.
© Copyright 2012 TRENDnet. All Rights Reserved.
c. Next to Does ISP provide more IP addresses option, check Yes.
d. Under Alias IP Address, enter each additional static public IP address, then click Add
for each IP address additional IP address will also be listed and available to select from.
e. Click Apply at the bottom of the page to apply the changes. After the settings have
been applied, click Continue on the following page.
Note: If you would like to discard the changes, click Cancel before you click Apply.
If you have multiple static WAN/Internet IP addresses assigned by your ISP (Internet
Service Provider), you can map these WAN/Internet IP addresses to a local computer or
device on your network and expose these computers or devices on your network to the
Internet to allow anyone to access them. Your router includes the capability of
forwarding all the ports and services available on the WAN/Internet IP side IP address
and forwarding them to specified IP address (computers or network devices) on your
network.
TW100-BRF214
26

Advertisement

Table of Contents
loading

Table of Contents