TRENDnet TW100-BRF114 Frequently Asked Questions Manual
Trendnet tw100-brf114: frequently asked questions
Hide thumbs
Also See for TW100-BRF114:
- User manual (83 pages) ,
- Quick installation manual (9 pages) ,
- Install manual (5 pages)
Advertisement
Quick Links
TW100-BRF114 F.A.Q.
Q: How do I configure the TW100-BRF114 for a DSL, PPPoE connection?
A:
Open your web browser and type the IP address of the TW100-BRF114 in the address bar. The
default IP address is 192.168.0.1. At the login, enter your username (blank) and password (blank).
NOTE: If the Setup Wizard starts, click on Cancel.
Click on Advanced then WAN Port on the left hand side.
Step 1.
Choose PPPoE for the Login Method in the Login section.
Step 2.
Enter your Username and Password provided by your ISP (Internet Service Provider).
Step 3.
Click on the down arrow for the Connection behavior and select "keepalive".
Step 4.
Click Save.
Note: After you save the settings you may need to power cycle the modem and router.
Step 1.
Disconnect the power cycle from the modem and router.
Step 2.
Wait approximately 15 seconds.
Step 3.
Reconnect the modem first and wait for it to boot up.
Step 4.
After the modem has booted up reconnect the router.
Step 5.
Open your web browser and type the IP address of the TW100-BRF114 in the address
bar. The default IP address is 192.168.0.1. At the login, enter your username (blank) and
password (blank).
NOTE: If the Setup Wizard starts, click on Cancel.
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for TRENDnet TW100-BRF114
Summary of Contents for TRENDnet TW100-BRF114
- Page 1 Q: How do I configure the TW100-BRF114 for a DSL, PPPoE connection? Open your web browser and type the IP address of the TW100-BRF114 in the address bar. The default IP address is 192.168.0.1. At the login, enter your username (blank) and password (blank).
- Page 2 Step 7. Click on Connect, wait a few seconds and see if it gets an IP address from your ISP. Q: How do I configure the TW100-BRF114 for a Cable connection using a Dynamic IP Address? Note: The default setting of the router is configured for a Cable connection using a Dynamic IP Address.
- Page 3 After the modem has booted up reconnect the router. Step 5. Open your web browser and type the IP address of the TW100-BRF114 in the address bar. The default IP address is 192.168.0.1. At the login, enter your username (blank) and password (blank).
- Page 4 Q: How do I change the username & password on my TW100-BRF114? Open your web browser and type the IP address of the TW100-BRF114 in the address bar. The default IP address is 192.168.0.1. At the login, enter your username (blank) and password (blank).
- Page 5 The default IP address for the TW100-BRF114 is 192.168.0.1. Q: What is the default username and password for the TW100-BRF114? The default username & password for the TW100-BRF114 are both (blank). There is no username and password set by default.
- Page 6 Q: How do I change the IP Address of my TW100-BRF114? Step 1. Open your web browser and type the IP address of the TW100-BRF114 in the address bar. The default IP address is 192.168.0.1. At the login, enter your username (blank) and password (blank).
- Page 7 TW100-BRF114 F.A.Q. Step 3. Highlight the Internet Protocol (TCP/IP) by single clicking on it then click on P roperties. Step 4. Select Obtain an IP address automatically and Obtain DNS server address automatically then click OK.
- Page 8 Your computer is now ready to access and configure the TW100-BRF114. Step 7. Open your web browser and type the IP address of the TW100-BRF114 in the address bar. The default IP address is 192.168.0.1. At the login, enter your username (blank) and password (blank).
- Page 9 Q: How do I forward ports in my TW100-BRF114? Open your web browser and type the IP address of the TW100-BRF114 in the address bar. The default IP address is 192.168.0.1. At the login, enter your username (blank) and password (blank).
Need help?
Do you have a question about the TW100-BRF114 and is the answer not in the manual?
Questions and answers