Set Up Dhcp Reservation - TRENDnet TEW-827DRU User Manual

TRENDnet User's Guide

Set up DHCP reservation

Advanced > Setup > LAN Settings
DHCP (Dynamic Host Configuration Protocol) reservation (also called Static DHCP) allows
your router to assign a fixed IP address from the DHCP server IP address range to a
specific device on your network. Assigning a fixed IP address can allow you to easily
keep track of the IP addresses used on your network by your computers or devices for
future reference or configuration such as virtual server (also called port forwarding, see
"Virtual Server" on page 46) or special applications (also called port triggering, see
"Special Applications" on page 48).
1. Log into your router management page (see
on page 10).
2. Click on Advanced and click on Setup, then click on LAN Settings.
3. Review the DHCP reservation settings. To save changes to this section, click Apply
when finished. Commit your changes to the router by clicking on Apply/Discard
Changes in the left-hand menu, and click Apply & Reboot.

Enable – Enable or Disable the DHCP reservation.

Computer Name – Enter a name of the device you will assign the DHCP
reservation. Note: You can click the Computer Name drop-down list to select
from an available computer in the DHCP server listing, click >> to copy the
computer's host name/IP address information into the fields.

IP Address – Enter the IP address to assign to the reservation. (e.g.
192.168.10.101)
Note: You can click the Computer Name drop-down list to select from an
available computer in the DHCP server listing, click >> to copy the computer's
host name/IP address information into the fields.

MAC Address – Enter the MAC (Media Access Control) address of the computer
or network device to assign to the reservation. (e.g. 00:11:22:AA:BB:CC)
Note: You can click Clone your PC's MAC Address to copy the current
computer's MAC address into the MAC address field.

Copy your PC's MAC – To copy your current computer's MAC address to the
field, you can click Copy.
© Copyright 2016 TRENDnet. All Rights Reserved.
"Access your router management page"
Click Add - Saves the reservation.
Note: Click Clear discards and erases the current information.
You will see the new reservation added to the DHCP Reservations Ready Group. This is a
temporary list until you save changes by clicking Apply. You can continue to add more
DHCP reservation entries which will appear in this list. Once you have saved the settings,
the entries will appear under the DHCP Reservations list. You can click Reset to clear the
entries in the list or check the Delete option, next to the entry to remove and click
Delete.
Under the DHCP Reservations List,
You can click the icon to edit the reservation or check the Delete option next to the
entry to remove and click Delete Selected to delete the reservation. You can also click
Delete All to delete all DHCP reservation entries from the list.
To save changes when modifying a reservation, click Save.
Note: If you would like to discard the changes, click Clear.
TEW-827DRU
40