Label On The Rear Panel; Powerline Hd Ethernet Adapters And Your Network - NETGEAR HDX111 - Powerline HD Plus Ethernet Adapter User Manual

Table 1-1. HDX111 Physical Features (continued)
Item
5. Status light
6. Ethernet light
7. 10/100 Ethernet
port

Label on the Rear Panel

The label on the rear panel of the HDX111 contains the items listed below.
• MAC address
• Model number
• Serial number

Powerline HD Ethernet Adapters and Your Network

After you install the Powerline HD Plus Ethernet Adapters, your network will combine an
Ethernet portion, where the devices are connected with cables, with a Powerline portion, where the
devices are connected over your electrical wires.
Installing and Using the Powerline HD Plus Ethernet Adapter
HDX111 Powerline HD Plus Ethernet Adapter User Manual
Description
Indicates the link speed or other quality states:
• Solid green when the link speed is greater than 80 Mbps.
• Solid orange indicates the link speed is between 80 Mbps and 50 Mbps.
• Solid red when the link speed is less than 50 Mbps.
• Blinking red twice every 5 seconds when in Standby mode.
• Blinking red once per second when the Powerline HD Ethernet adapter cannot
find any other Powerline devices with the same network ID.
Indicates the status of Ethernet traffic:
• Solid green when the Ethernet port is linked but there is no activity.
• Blinking green when there is traffic between an Ethernet port and the Powerline.
• Off when there is no Ethernet connection.
Connect an Ethernet cable to a router, computer, or other peripheral device.
v1.1, March 2008
1-3