System Status - Cisco SR520-FE-K9 Administration Manual

6
116
Client Certificate
Serial Number
Hardware Version
MAC Address
Customization

System Status

Voice > Info > System Status
Current Time
RTP Packets Sent
RTP Packets Recv
SIP Messages Sent
SIP Messages Recv
External IP
Elapsed Time
RTP Bytes Sent
RTP Bytes Recv
SIP Bytes Sent
SIP Bytes Recv
Cisco SRP500 Series Services Ready Platforms Administration Guide (SRP520 Models)
Status of the client certificate, which can indicate if
the SRP was authorized by your ITSP.
Product serial number.
Hardware version number.
MAC Address. For example: 8843E1657936.
Feature not used.
Current date and time of the system; for example,
10/3/2003 16:43:00. Set the system time by using
the Administration > Time Setup page.
Total number of RTP packets sent (including
redundant packets).
Total number of RTP packets received (including
redundant packets).
Total number of SIP messages sent (including
retransmissions).
Total number of SIP messages received (including
retransmissions).
External IP address used for NAT mapping.
Total time elapsed since the last reboot of the
system; for example, 25 days and 18:12:36.
Total number of RTP bytes sent.
Total number of RTP bytes received.
Total number of bytes of SIP messages sent
(including retransmissions).
Total number of bytes of SIP messages received
(including retransmissions)
Configuring Voice
Configuring Voice Settings