Power Supply Led; Sys Led-System Status - Cisco 1120 Hardware Installation

Figure 1 Cable Panel (Rear Panel) LEDs

Power Supply LED

The power status LED indicates the power status of the router.
Table 1 Power Supply LED
LED Label
AC/DC Power Supply
SYS LED—System Status
The system status (SYS) LED indicates the system or operating status of the router.
Table 2 SYS LED
LED Color and State
Label
Green
Green blinking
Amber
Off
Color Description
Green/Red Off: PSU no present
Green: DC output is OK
Red: DC output failed, but AC/DC input is good
Description
Normal system operating status
The system is starting up or power cycling, and loading system software, including BIOS
and operating system
System receiving power but there is an error condition
System not receiving power
86
Power
Supply
LED
Location Drvr
PSU and wiring side HW