Supplementary Service Settings - Cisco SR520-FE-K9 Administration Manual

6
180

Supplementary Service Settings

The SRP provides native support of a large set of enhanced or supplementary
services. All of these services are optional. The parameters listed in the following
table are used to enable or disable a specific supplementary service. A
supplementary service should be disabled if a) the user has not subscribed for it,
or b) the Service Provider intends to support similar service using other means
than relying on the SRP.
Voice > User 1–2 > Supplementary Service Settings
CW Setting
Block CID Setting
Block ANC Setting
DND Setting
CID Setting
CWCID Setting
Dist Ring Setting
Secure Call Setting
Cisco SRP500 Series Services Ready Platforms Administration Guide (SRP520 Models)
Call Waiting on/off for all calls.
The default is yes.
Block Caller ID on/off for all calls.
The default is no.
Block Anonymous Calls on or off.
The default is no.
DND on or off.
The default is no.
Caller ID Generation on or off.
The default is yes.
Call Waiting Caller ID Generation on or off.
The default is yes.
Distinctive Ring on or off.
The default is yes.
If yes, all outbound calls are secure calls by default.
The default is no.
Configuring Voice
Configuring Voice Settings