Chapter 2: Getting Started With The Configuration Utility; Logging In To The Configuration Utility - Cisco SR520-FE-K9 Administration Manual

Getting Started with the Configuration Utility

Logging In to the Configuration Utility

STEP 1
STEP 2
STEP 3
NOTE
NOTE
Cisco SRP500 Series Services Ready Platforms Administration Guide (SRP520 Models)
This chapter describes how to configure and use the Services Ready Platform
Configuration Utility. This is a web-based utility you use to manage and provision
your SRP (Services Ready Platform).
This chapter includes the following sections:.
• Logging In to the Configuration Utility
• Overview of the Configuration Utility
This section describes how to log in to Services Ready Platform Configuration
Utility.
Connect a computer to an available LAN port of your SRP.
By default, your PC will become a DHCP client of the SRP and will receive an IP
address in the 192. 1 68. 1 5.x range.
Start a web browser.
In the Address bar, enter http://192. 1 68. 1 5. 1 . This is the default address of the SRP.
When the login window opens, enter the username and password to login as the
administrator.
The default username is admin.
The default password is admin.
Passwords are case sensitive.
If you log in as cisco (with password of cisco), the Setup Wizard will automatically
begin. if you log in as admin, you can start the Setup Wizard by clicking
Administration > Setup Wizard.
2
18