Basic Wireless Settings - Cisco SR520-FE-K9 Administration Manual

Setting up the Interfaces of the Services Ready Platforms
Setting up the Wireless LAN
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
Cisco SRP500 Series Services Ready Platforms Administration Guide (SRP520 Models)

Basic Wireless Settings

Use the Basic Wireless Settings page to the SRP's integrated wireless access
point and up to four wireless networks.
Click Interface Setup > Wi-Fi Settings > Basic Wireless Settings. The Basic
Wireless Settings window opens.
Configure the wireless network settings as defined in the
Settings table. When you are finished, click Submit to save your settings.
Select the network mode to turn the radio on and click Apply.
Configure the network security settings for each SSID. In the Wireless Table area,
click the Edit link in the Security column. The Wireless Security window opens.
Choose the security mode setting from the drop-down list. The default is
Disabled.
When you enable a security mode, a window opens that defines the security
settings for that mode (authentication type, encryption, passphrase, and so on).
Enter the security settings as defined in the
click Submit to save your settings.
You are returned to the Basic Wireless page.
Basic Wireless
Basic Wireless Settings
4
table and
49