Chapter 7: Configuring Vpn; Ike Policy - Cisco SR520-FE-K9 Administration Manual

Configuring VPN

IKE Policy

STEP 1
STEP 2
STEP 3
STEP 4
Cisco SRP500 Series Services Ready Platforms Administration Guide (SRP520 Models)
This chapter describes how to configure VPN policies and settings for the SRP. It
includes the following sections:
• IKE Policy
• IPSec Policy
• GRE Tunnel
• VPN Passthrough
• Cisco VPN Server
To access these pages click VPN from the Configuration Utility menu bar.
Use the IKE Policy page to configure a VPN IKE policy. Each IKE policy contains the
parameters for setting IKE authentication rules. These IKE policies are used in
different VPN policies
Click VPN > Site to Site IPSec VPN > IKE Policy. The IKE Policies window opens.
From this window you can view the existing IKE policies from the List of IKE
polices, edit a policy, view the policy details, and a add new IKE policy.
To add an IKE policy, click Add Entry. The IKE Policy configuration window for the
new policy opens.
In the Policy Name field, enter a unique name for the VPN policy.
Choose an Exchange mode from the drop-down list. You can choose from either
Main or Aggressive mode.
Select Main mode if you want higher security, but with a slower connection. Select
Aggressive this mode if you want a faster connection, but with lowered security.
7
183