Chapter 14 Router Led Location And State; Led Locations And State Descriptions; Sys Led-System Status - Cisco 1240 Hardware Installation Manual

LED Locations and State Descriptions

LED Locations and State Descriptions
SYS LED—System Status
View the system status LED to determine the overall operating and power status of the router.
A second, identical system status LED is located inside the router. See the
Connection LEDs" section on page 14-3
Figure 14-1
Table 14-1
Label
Description
SYS
System status
Cisco 1240 Connected Grid Router Hardware Installation Guide
14-2
for the location of the interior SYS LED.
System Status LED (SYS) — Router Bottom Exterior
SYS LED Status
Color and State Description
Green Normal system operating status
Green blinking The system is starting up or power cycling, and loading system
software, including BIOS and operating system
Amber System receiving power but there is an error condition
Off System not receiving power
Chapter 14 Router LED Locations and States
"Alarm and Network
OL-26223-04