16- and 36-Port Ethernet Switch Module for Cisco 2600 Series, Cisco 3600 Series, and Cisco 3700 Series
The switchport command without keywords is not used on platforms that do not support Cisco-routed
Note
ports. All physical ports on such platforms are assumed to be Layer 2-switched interfaces.
You can verify the switchport status of an interface by entering the show running-config privileged
EXEC command.
Related Commands
Command
show interfaces
show running-config
Description
switchport Displays the administrative and operational status of a switching
(nonrouting) port, including port blocking and port protection settings.
Displays the current operating configuration.
Cisco IOS Release 12.2(2)XT, 12.2(8)T, and 12.2(15)ZJ
switchport
241