Cisco NM-8B-U - HW ROUTERS L-M User Manual page 235

16- and 36-Port Ethernet Switch Module for Cisco 2600 Series, Cisco 3600 Series, and Cisco 3700 Series
show storm-control
To display the packet-storm control information, use the show storm-control command in privileged
EXEC mode. This command also displays the action that the switch takes when the thresholds are
reached.
Syntax Description interface-id
broadcast
multicast
unicast
history
Command Modes
Privileged EXEC
Command History Release
12.1(6)EA2
12.2(15)ZJ
Usage Guidelines
If the interface-id value is omitted, the show storm-control command displays storm-control settings
for all ports on the switch.
You can display broadcast, multicast, or unicast packet-storm information by using the corresponding
keyword. When no option is specified, the default is to display broadcast storm-control information.
Examples The following is sample output from the show storm-control broadcast command:
Switch# show storm-control broadcast
Interface
---------
Fa0/1
Fa0/2
Fa0/3
Fa0/4
.
.
.
show storm-control [interface-id] [broadcast | multicast | unicast | history]
(Optional) Port for which information is to be displayed.
(Optional) Displays broadcast storm information.
(Optional) Displays multicast storm information.
(Optional) Displays unicast storm information.
(Optional) Displays storm history on a per-port basis.
Modification
This command was introduced. It replaced the show port storm-control
command.
This command was implemented on the Cisco 2600 series,
Cisco 3600 series, and Cisco 3700 series routers.
Filter State Upper
------------- -------
<inactive> 100.00%
<inactive> 100.00%
<inactive> 100.00%
Forwarding
Lower Current
------- -------
100.00% 0.00%
100.00% 0.00%
100.00% 0.00%
30.00% 20.00% 20.32%
Cisco IOS Release 12.2(2)XT, 12.2(8)T, and 12.2(15)ZJ
show storm-control
235