Cisco NM-8B-U - HW ROUTERS L-M User Manual page 220

show ip access-lists
show ip access-lists
To display IP access control lists (ACLs) configured on the switch, use the show ip access-lists
command in privileged EXEC mode.
Syntax Description
name
number
Command Modes Privileged EXEC
Command History Release
12.1(6)EA2
12.2(15)ZJ
Usage Guidelines
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples
The following is sample output from the show ip access-lists command:
Switch# show ip access-lists
Standard IP access list testingacl
Standard IP access list wizard_1-1-1-2
Extended IP access list 103
Extended IP access list CMP-NAT-ACL
The following is sample output from the show ip access-lists 103 command:
Switch# show ip access-lists 103
Extended IP access list 103
Cisco IOS Release 12.2(2)XT, 12.2(8)T, and 12.2(15)ZJ
220
16- and 36-Port Ethernet Switch Module for Cisco 2600 Series, Cisco 3600 Series, and Cisco 3700 Series
show ip access-lists [name | number]
(Optional) ACL name.
(Optional) ACL number. The range is from 1 to 199 and from 1300 to 2699.
Modification
This command was introduced.
This command was implemented on the following platforms: Cisco 2600
series, Cisco 3600 series, and Cisco 3700 series routers.
permit 10.10.10.2
permit 1.1.1.2
permit tcp any any eq www
Dynamic Cluster-HSRP deny
Dynamic Cluster-NAT permit ip any any
permit ip host 10.245.155.128 any
permit ip host 10.245.137.0 any
permit ip host 10.146.106.192 any
permit ip host 10.216.25.128 any
permit ip host 10.228.215.0 any
permit ip host 10.221.111.64 any
permit ip host 10.123.222.192 any
permit ip host 10.169.110.128 any
permit ip host 10.186.122.64 any
permit tcp any any eq www
ip any any