Cisco NM-8B-U - HW ROUTERS L-M User Manual page 203

16- and 36-Port Ethernet Switch Module for Cisco 2600 Series, Cisco 3600 Series, and Cisco 3700 Series
The following example shows how to configure a VLAN interface to be a DSCP-trusted port.
DSCP-to-COS mapping occurs for all packets with the configured VLAN ID of 60 egressing from the
CPU to the physical port.
Switch(config)# interface vlan 60
Switch(config-if)# mls qos trust dscp
You can verify your settings by entering the show mls qos interface privileged EXEC command.
Related Commands Command
mls qos cos
mls qos map
show mls qos interface
Description
Defines the default CoS value of a port or assigns the default CoS to all
incoming packets on the port.
Defines the CoS-to-DSCP map or the DSCP-to-CoS map.
Displays QoS information.
Cisco IOS Release 12.2(2)XT, 12.2(8)T, and 12.2(15)ZJ
mls qos trust
203