Cisco NM-8B-U - HW ROUTERS L-M User Manual page 219

16- and 36-Port Ethernet Switch Module for Cisco 2600 Series, Cisco 3600 Series, and Cisco 3700 Series
Table 21
Field
RX EAP Resp/Oth
RX EAP LenError
Last EAPOLVer
LAST EAPOLSrc
TX EAPOL Total
TX EAP Req/Id
TX EAP Req/Oth
1. EAPOL = Extensible Authentication Protocol over LAN
2. EAP = Extensible Authentication Protocol
Related Commands Command
dot1x default
show dot1x statistics Field Descriptions (continued)
Description
Number of valid EAP-response frames (other than response/identity
frames) that have been received.
Number of EAPOL frames that have been received in which the packet
body length field is invalid.
Protocol version number carried in the most recently received EAPOL
frame.
Source MAC address carried in the most recently received EAPOL
frame.
Number of EAPOL frames of any type that have been sent.
Number of EAP-request/identity frames that have been sent.
Number of EAP-request frames (other than request/identity frames) that
have been sent.
Description
Resets the global 802.1x parameters to their default values.
Cisco IOS Release 12.2(2)XT, 12.2(8)T, and 12.2(15)ZJ
show dot1x
219