Cisco NM-8B-U - HW ROUTERS L-M User Manual page 209

16- and 36-port ethernet switch module for cisco 2600 series, cisco 3600 series, and cisco 3700 series
Table of Contents

Advertisement

16- and 36-Port Ethernet Switch Module for Cisco 2600 Series, Cisco 3600 Series, and Cisco 3700 Series
policy-map
To create or modify a policy map that can be attached to multiple interfaces and to enter policy-map
configuration mode, use the policy-map command in global configuration mode. To delete an existing
policy map and return to global configuration mode, use the no form of this command.
Syntax Description
policy-map-name
Defaults
No policy maps are defined.
Command Modes
Global configuration
Command History
Release
12.1(6)EA2
12.2(15)ZJ
Usage Guidelines
Entering the policy-map command enables the policy-map configuration mode. These configuration
commands are available:
In a policy map, the class named class-default is not supported. The switch does not filter traffic
Note
based on the policy map defined by the class class-default policy-map configuration command.
To return to global configuration mode, use the exit command. To return to privileged EXEC mode, use
the end command.
Before you can configure policies for classes whose match criteria are defined in a class map, use the
policy-map command to specify the name of the policy map to be created or modified. Entering this
command also enables the policy-map configuration mode in which you can configure or modify the
class policies for that policy map.
policy-map policy-map-name
no policy-map policy-map-name
Name of the policy map.
Modification
This command was introduced.
This command was implemented on the following platforms: Cisco 2600
series, Cisco 3600 series, and Cisco 3700 series routers.
class: defines the classification match criteria for the specified class map. For more information, see
the class command.
description: describes the policy map (up to 200 characters).
exit: exits policy-map configuration mode and returns to global configuration mode.
no: removes a previously defined policy map.
rename: renames the policy map.
Cisco IOS Release 12.2(2)XT, 12.2(8)T, and 12.2(15)ZJ
policy-map
209

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents