Cisco NM-8B-U - HW ROUTERS L-M User Manual page 214

show class-map
show class-map
To display quality of service (QoS) class maps, which define the match criteria to classify traffic, use the
show class-map command in privileged EXEC mode.
Syntax Description
class-map-name
Command Modes
Privileged EXEC
Command History Release
12.1(6)EA2
12.2(15)ZJ
Usage Guidelines
If you do not specify a class-map-name, all class maps appear.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples
The following is sample output from the show class-map test command:
Switch# show class-map test
Class Map match-all test (id 2)
Match access-group name testingacl
The following is sample output from the show class-map command:
Switch# show class-map
Class Map match-all wizard_1-1-1-2 (id 3)
Match access-group name videowizard_1-1-1-2
Class Map match-all test (id 2)
Match access-group name testingacl
Class Map match-any class-default (id 0)
Match any
Class Map match-all class1 (id 5)
Match access-group
Class Map match-all classtest (id 4)
Description: This is a test.
Match access-group name testingacl
Cisco IOS Release 12.2(2)XT, 12.2(8)T, and 12.2(15)ZJ
214
16- and 36-Port Ethernet Switch Module for Cisco 2600 Series, Cisco 3600 Series, and Cisco 3700 Series
show class-map [class-map-name]
(Optional) Display the contents of the specified class map.
Modification
This command was introduced.
This command was implemented on the following platforms: Cisco 2600
series, Cisco 3600 series, and Cisco 3700 series routers.
103