Cisco NM-8B-U - HW ROUTERS L-M User Manual page 207

16- and 36-port ethernet switch module for cisco 2600 series, cisco 3600 series, and cisco 3700 series
Table of Contents

Advertisement

16- and 36-Port Ethernet Switch Module for Cisco 2600 Series, Cisco 3600 Series, and Cisco 3700 Series
police
To define a policer for classified traffic, use the police command in policy-map class configuration
mode. To remove an existing policer, use the no form of this command.
Syntax Description
bps | cir bps
burst-byte | bc burst-byte
conform-action transmit
exceed-action drop
exceed-action dscp
dscp-value
Defaults
No policers are defined.
Command Modes
Policy-map class configuration
Command History
Release
12.1(6)EA2
12.2(15)ZJ
Usage Guidelines
You can configure up to six policers on ingress Fast Ethernet ports.
You can configure up to 60 policers on ingress Gigabit-capable Ethernet ports.
Policers cannot be configured on egress Fast Ethernet and Gigabit-capable Ethernet ports.
To return to policy-map configuration mode, use the exit command. To return to privileged EXEC mode,
use the end command.
police {bps | cir bps} [burst-byte | bc burst-byte] conform-action transmit [exceed-action {drop
| dscp dscp-value}]
police {bps | cir bps} [burst-byte | bc burst-byte] conform-action transmit [exceed-action {drop
| dscp dscp-value}]
Average traffic rate or committed information rate in bits per second
(bps).
For 10/100 ports, the range is 1000000 to 100000000, and the granularity
is 1 Mbps.
For Gigabit-capable Ethernet ports, the range is 8000000 to 1016000000,
and the granularity is 8 Mbps.
(Optional) Normal burst size or burst count in bytes.
Sends packets that conform to the rate limit.
(Optional) When the specified rate is exceeded, specifies that the switch
drop the packet.
(Optional) When the specified rate is exceeded, specifies that the switch
changes the Differentiated Services Code Point (DSCP) of the packet to
the specified dscp-value and then sends the packet.
Modification
This command was introduced.
This command was implemented on the following platforms: Cisco 2600
series, Cisco 3600 series, and Cisco 3700 series routers.
Cisco IOS Release 12.2(2)XT, 12.2(8)T, and 12.2(15)ZJ
police
207

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents