Rear Panel Features; Reset Features; Mounting; Mounting Options - Extron electronics IPL EXP I/O Series User Manual

Rear Panel Features

COM
1
Tx Rx G Tx Rx G
RESET
Reset
COM
Button
RS-232
ports
(recessed)
and LED
1
Tx Rx G Tx Rx G
RESET
Reset Button
(recessed)
and LED
Figure 5. Rear Panels — Left: IPL EXP S2, IPL EXP S5

Reset Features

Reset button and LED — Pressing this recessed button causes various product settings to be reset to the
factory defaults. The green Reset LED (rear panel of the IPL EXP S2, IPL EXP S5, IPL EXP 200) or Power LED
(front panel of the IPL EXP RIO8) blinks depending on the selected reset mode (see
page 27 and the

Mounting

Mounting Options

Optional 1U rack shelves are available for use with all IPL EXP models. A variety of rack mounting bracket kits
and furniture mounting kits are available for use with the IPL EXP RIO8.
• Optional furniture mounting bracket kits are available for use with the IPL EXP RIO8 .
• All other models come with a ZipClip 200 mounting bracket, which can be mounted to to the following items:
• tabletop
• optional equipment rack shelf
See the product-specific page at
expansion interface. Visit the product-specific page on the Extron website (www.extron.com) for a list of
compatible accessories for mounting your control processor or call a support representative to find out which kit to
order for your installation.
Read the instructions that are included with the rack shelf or mounting kit for installation procedures and
see the UL rack mounting guidelines below for safe installation. Then securely mount the control system
expansion interface and other devices and attach cables using the wiring section (see
Connections on page 14) as a wiring guide.
IPL EXP S2
00-05-A6-XX-XX-XX
MAC: 00-05-A6-XX-XX-XX
S/N: ####### E######
LAN/PoE
2
LAN/PoE
(Ethernet)
connector
and LEDs
IPL EXP S5
MAC: 00-05-A6-XX-XX-XX
COM
S/N: ####### E######
LAN/PoE
2 3 4 5
Tx Rx G Tx Rx G Tx Rx G
LAN/PoE (Ethernet)
connector and
LEDs
reset modes table starting on page 27 for details).
www.extron.com
Reset Button
(recessed) and LED
Tx Rx G
COM 1
COM 2
RESET
Tx Rx G
MAC
COM
address
RS-232
ports
1 2 12V24V G
12 VDC / 24 VDC
19W MAX TOTAL
5 6 12V24V G
+V OUT / DIGITAL I/O
Digital I/O ports with
12 VDC and 24 VDC
output ports
Right: IPL EXP 200, IPL EXP RIO8
• equipment rack rails
• furniture
for a list of compatible accessories for mounting your
IPL EXP I/O Series • Hardware Features and Installation
MAC: 00-05-A6-XX-XX-XX
S/N: ####### E######
RELAYS DIGITAL I/O
IR/S
1 2 C 1 2 3 4 G
S G
IR/Serial Relay Digital I/O LAN/PoE
output ports ports (Ethernet)
port connector
and LEDs
IPL EXP RIO8
3 4 12V24V G 2
1 3 4
MAC: 00-05-A6-XX-XX-XX
S/N: ####### E######
7 8 12V24V G 5 6 7 8
LAN / PoE+
RELAYS
Relay LAN/PoE (Ethernet)
ports connector and
Resetting the Unit
Ports, Addressing, and
IPL EXP 200
LAN/PoE
MAC
address
LEDs
on
10