Upgrade Firmware - TRENDnet TW100-BRV304 User Manual

Upgrade Firmware

Use this screen to upgrade your TW100-BRV304's firmware.
•
You must download the required firmware file, and store it on your PC.
•
During the upgrade process, all existing Internet connections will be terminated.
•
The upgrade process must NOT be interrupted!.
Data – Upgrade Firmware Screen
Upgrade Firmware
TW100-BRV304
Password
Upgrade File
Start Upgrade
Cancel
To perform the Firmware Upgrade:
1. Click the "Browse" button and navigate to the location of the upgrade file.
2. Select the upgrade file. It's name will appear in the Upgrade File field.
3. Click the "Start Upgrade" button to commence the firmware upgrade.
Figure 118: Upgrade Firmware Screen
Enter the current password assigned to the TW100-BRV304. If no
password has been assigned, leave this blank.
Click the "Browse" button and browse to the location on your PC
where you stored the firmware upgrade file. Select this file.
Click this button to start the Firmware upgrade. Note than any users
accessing the Internet via the TW100-BRV304 will lose their con-
nection. When the upgrade is finished, the TW100-BRV304 will
restart, and this management connection will be unavailable during
the restart.
Cancel does NOT stop the Upgrade process if it has started. It only
clears the input for the "Upgrade File" field.
The TW100-BRV304 is unavailable during the up-
grade process, and must restart when the upgrade is
completed. Any connections to or through the
TW100-BRV304 will be lost.
Other Features and Settings
137