TRENDnet TW100-BRV304 User Manual page 120

TW100-BRV304 User's Guide
5. Click "Finish" to exit the Wizard.
The new entry will now be listed in "Dial-up Networking".
If necessary, you can change the settings for this connection by right-clicking on it, and select-
ing Properties.
To force all outgoing traffic to be sent via VPN, enable the setting This is the default Internet
connection on the Dialing tab. (Do NOT enable this setting if using Dial-up or PPPoE client
software.)
To establish a connection:
1. Ensure you are connected to the Internet.
2. Select Start - Settings - Dial-up Networking
3. Double-click the new VPN entry in Dial-up Networking.
4. Enter your User name and Password, as recorded in the Client database on the TW100-
BRV304.
5. Click the "Connect" button.
Windows ME VPN Dialing Properties
116