Connection Details - Singtel Ras - TRENDnet TW100-BRV304 User Manual

Buttons
Connect
Disconnect
Clear Log
Refresh

Connection Details - SingTel RAS

If using the SingTel RAS access method, a screen like the following example will be displayed
when the "Connection Details" button is clicked.
Data - SingTel RAS Screen
Internet
RAS Plan
Physical Address
IP Address
Network Mask
Default Gateway
DNS IP Address
DHCP Client
If not connected, establish a connection to Telstra Big Pond.
If connected to Telstra Big Pond, terminate the connection.
Delete all data currently in the Log. This will make it easier to read
new messages.
Update the data on screen.
Figure 24: Connection Details - SingTel RAS
The RAS Plan which is currently used.
The hardware address of this device, as seen by remote devices on
the Internet. (This is different to the hardware address seen by
devices on the local LAN.)
The IP Address of this device, as seen by Internet users. This address
is allocated by your ISP (Internet Service Provider).
The Network Mask associated with the IP Address above.
The IP Address of the remote Gateway or Router associated with the
IP Address above.
The IP Address of the Domain Name Server which is currently used.
This will show "Enabled" or "Disabled", depending on whether or
not this device is functioning as a DHCP client.
If "Enabled" the "Remaining lease time" field indicates when the IP
Operation and Status
39