Network Diagnostics - TRENDnet TW100-BRV304 User Manual

Network Diagnostics

This screen allows you to perform a "Ping" or a "DNS lookup". These activities can be useful
in solving network problems.
An example Network Diagnostics screen is shown below.
Data - Network Diagnostics Screen
Ping
IP Address
Ping Button
DNS Lookup
Domain
name/URL
Lookup Button
Figure 112: Network Diagnostics Screen
Enter the IP address you wish to ping. The IP address can be on your
LAN, or on the Internet. Note that if the address is on the Internet,
and no connection currently exists, you could get a "Timeout" error.
In that case, wait a few seconds and try again.
After entering the IP address, click this button to start the "Ping"
procedure. The results will be displayed in the Ping Results pane.
Enter the Domain name or URL for which you want a DNS (Domain
Name Server) lookup. Note that if the address in on the Internet, and
no connection currently exists, you could get a "Timeout" error. In
that case, wait a few seconds and try again.
After entering the Domain name/URL, click this button to start the
"DNS Lookup" procedure.
Other Features and Settings
125