Quick Installation Guide Requirements DSL or Cable modem for broadband Internet access. Standard Network cables. TCP/IP network protocol installed on each PC. Setup Œ Physical Installation TW100-BRF204 (VPN Firewall Router) 1. Ensure the Firewall VPN Router and the DSL/Cable mo- dem are powered OFF before commencing.
Page 3
Quick Installation Guide If required, connect any LAN port on the VPN Router to a normal port on another Hub/Switch, using a stan- dard LAN cable. Any LAN port on the VPN Firewall Router will auto- matically function as an "Uplink" port when required. 3.
Page 4
Quick Installation Guide TW100-BRV304 (Advanced VPN Firewall Router) 1. Ensure the Advanced VPN Firewall Router and the DSL/Cable modem are powered OFF before commencing. Leave your DSL/Cable modem connected to its wall socket (phone line or cable input). 2. Use standard LAN cables to connect PCs to the LAN ports on the Advanced VPN Firewall Router.
For each active LAN (PC) connection, the LAN Link/Act LED should be ON. • Configuration The TW100-BRV204 and TW100-BRV304 can "Plug and Play" if your DSL/Cable modem account uses dynamic IP ad- dress connection only. Testing Plug and Play 1. Power up the DSL/Cable modem.
Page 6
Quick Installation Guide 3. Click Setup Wizard on the main menu. 4. Step through the Wizard until finished. Refer to the data from your ISP, and the table below, to ensure your choices are correct. Connection Type Data required. Dynamic IP Address Usually, none.
Page 7
Quick Installation Guide PC Setup - Windows Œ TCP/IP Setup If using the default VPN Firewall Routers settings, and the default Windows TCP/IP settings, no changes need to be made. If using a specified (fixed) IP address on your PC, refer to the user manual for details of the required changes: The Gateway must be set to the IP address of the Broadband VPN Gateway...
Quick Installation Guide 3. The default TCP/IP properties are correct and do not need to be changed. To view the properties, select the TCP/IP entry for your network card, as shown above, and click the Properties button. You will see a screen like the example below.
Page 9
Quick Installation Guide 5. Ensure all of the boxes on the following Local area net- work Internet Configuration screen are unchecked. 6. Check the "No" option when prompted "Do you want to set up an Internet mail account now?". 7. Click Finish to close the Internet Connection Wizard. Setup is now completed.
Quick Installation Guide Macintosh Setup Œ Internet Access 1. Open the TCP/IP Control Panel. 2. Select Ethernet from the Connect via pop-up menu. 3. Select Using DHCP Server from the Configure pop-up menu. The DHCP Client ID field can be left blank. 4.
Page 11
Quick Installation Guide Linux Setup using X Windows Œ Internet Access Follow this procedure to set your system to act as a DHCP client, obtaining an IP Address and related data from the Broadband VPN Gateway's DHCP Server. 1. Start your X Windows client. 2.
TRENDware provides FREE technical support for all customers for the duration of the warranty period on this product. TRENDware Technical Support Tel: +1-310-891-1100 Fax: +1-310-891-1111 E-mail: support@trendware.com www.trendnet.com Monday ~ Friday, 7:30AM ~ 6:00PM Pacific Stan- dard Time (except holidays) Page 11...