Common Vpn Situations - TRENDnet TW100-BRV304 User Manual

Common VPN Situations

VPN Pass-through
Here, a PC on the LAN behind the Router/Gateway is using VPN software, but the Rou-
ter/Gateway is NOT acting as a VPN endpoint. It is only allowing the VPN connection.
•
The PC software can use any VPN protocol supported by the remote VPN.
•
The remote VPN Server must support client PCs which are behind a NAT router, and so
have an IP address which is not valid on the Internet.
•
The Router/Gateway requires no VPN configuration, since it is not acting as a VPN
endpoint.
Client PC to VPN Gateway
In this situation, the PC must run appropriate VPN client software in order to connect, via the
Internet, to the TW100-BRV304. Once connected, the client PC has the same access to LAN
resources as PCs on the local LAN (unless restricted by the network administrator).
•
IPsec is not the only protocol which can be used in this situation, but the TW100-BRV304
supports IPsec ONLY.
•
Windows 2000 and Windows XP include a suitable IPsec VPN client program. Configura-
tion of this client program for use with the TW100-BRV304 is covered later in this
document.
Figure 45: VPN Pass-through
Figure 46: Client PC to VPN Server
Microsoft VPN
75