Virtual Servers Screen; Defining Your Own Virtual Servers; Connecting To The Virtual Servers - TRENDnet TW100-BRV304 User Manual

•
For each enabled Virtual Server, a firewall rule to allow incoming traffic from the Internet
(WAN) to the DMZ is automatically created. If the Server is connected to the LAN (hub)
ports, you must add the firewall rule manually.
Note that the DMZ port is a normal port, not an "uplink" port. If connecting to a hub, connect
to the standard port on the hub.

Virtual Servers Screen

The Virtual Servers screen is reached by the Virtual Servers link on the Internet menu. An
example screen is shown below.
This screen lists a number of pre-defined Servers, providing a quick and convenient method to
set up the common server types.
Data - Virtual Servers Screen
Servers
Servers
Properties
Enable
PC (Server)

Defining your own Virtual Servers

If the type of Server you wish to use is not listed on the Virtual Servers screen, you can use the
Firewall Rules to allow particular incoming traffic and forward it to a specified PC (Server).

Connecting to the Virtual Servers

Once configured, anyone on the Internet can connect to your Virtual Servers. They must use
the Internet IP Address (the IP Address allocated to you by your ISP).
e.g.
http://203.70.212.52
Figure 32: Virtual Servers Screen
This lists a number of pre-defined Servers, plus any Servers you
have defined. Details of the selected Server are shown in the
"Properties" area.
Use this to Enable or Disable support for this Server, as required.
•
If Enabled, any incoming connections will be forwarded to the
selected PC.
•
If Disabled, any incoming connection attempts will be blocked.
Select the PC for this Server. The PC must be running the appro-
priate Server software.
Internet Features
53