Vpn Configuration - TRENDnet TW100-BRV304 User Manual

VPN Configuration

This section covers the configuration required on the TW100-BRV304 when using Manual
Key Exchange (Manual Policies) or IKE (Automatic Policies).
Details of using Certificates are covered in a later section.
VPN Policies Screen
To view this screen, select VPN Policies from the VPN menu. This screen lists all existing
VPN policies. If no policies exist, the list will be empty.
Note that the order of policies is important if you have more than one policy for a particular
site. In that case, the first matching policy (for the traffic under consideration) will be used.
Data - VPN Policies Screen
VPN List
Policy Name
Enable
Remote VPN
Endpoint
Key Type
Operations
Add
Edit
Figure 48: VPN Policies Screen
The name of the policy. When creating a policy, you should select a
suitable name.
This indicates whether or not the policy is currently enabled. Use the
"Enable/Disable" button to toggle the state of the selected policy.
The IP address of the remote VPN endpoint (Gateway or client).
This will indicate "Manual" (manual key exchange) or "IKE" (Internet
Key Exchange)
To add a new policy, click the "Add" button. See the following section
for details.
To Edit or modify an existing policy, select it and click the "Edit"
button.
Microsoft VPN
77