TW100-BRV304 User's Guide
Use the IPSec VPN features:
•
VPN Policies
•
Certificates
•
CRLs
•
VPN Status
Use the Microsoft VPN feature:
•
PPTP Server in the TW100-BRV304.
•
User and Client setup.
•
Checking VPN connection Status.
Configure or use any of the following:
•
Configuration File backup and restore.
•
Network Diagnostic
•
PC Database
•
Remote Administration
•
Routing
•
Upgrade Firmware
•
UPnP
Configuration Program
The TW100-BRV304 contains an HTTP server. This enables you to connect to it, and confi-
gure it, using your Web Browser. Your Browser must support JavaScript. The
configuration program has been tested on the following browsers:
•
Netscape V4.08 or later
•
Internet Explorer V4 or later
Preparation
Before attempting to configure the TW100-BRV304, please ensure that:
•
Your PC can establish a physical connection to the TW100-BRV304. The PC and the
TW100-BRV304 must be directly connected (using the Hub ports on the TW100-
BRV304) or on the same LAN segment.
•
The TW100-BRV304 must be installed and powered ON.
•
If the TW100-BRV304 's default IP Address (192.168.0.1) is already used by another
device, the other device must be turned OFF until the TW100-BRV304 is allocated a new
IP Address during configuration.
Where use of a certain feature requires that
PCs or other LAN devices be configured, this
is also explained in the relevant chapter.
Chapter 8:
VPN (IPSec)
Chapter 9:
Microsoft VPN
Chapter 9:
Other Features and Settings
10