TRENDnet TW100-BRV304 User Manual page 112

TW100-BRV304 User's Guide
4. Check that the data displayed in the Certificate Details section is correct. This data is used
to generate the Certificate request. If the data is not correct, click the "Back" button and
correct the previous screen.
5. If the data is correct, copy the text in the Data to supply to CA panel
(including "
-----BEGIN CERTIFICATE REQUEST-----
and "
-----END CERTIFICATE REQUEST-----
Notepad, and save the file.
6. Click Finish to return to the Self Certificates screen.
Your request will be listed under Self Certificate Requests.
7. Apply for a Certificate:
•
Connect to the CA's web site.
•
Start the Self Certificate request procedure.
•
When prompted for the request data, supply the data you copied and saved in step 5
above.
•
Submit the CA's form.
•
If there are no problems, the Certificate will then be issued.
8. After obtaining a new Certificate, as described above, you need to upload it the TW100-
BRV304.
•
Return to the Self Certificates screen.
•
In the Self Certificate Requests list, select the request matching this certificate.
•
Click the Upload Certificate button.
You will see a screen like the one below.
9. Upload the Certificate:
•
Click the Browse button, and locate the certificate file on your PC
•
Select the file. The name will appear in the Certificate File field.
•
Click the Upload button to upload the certificate file to the TW100-BRV304.
•
Click Back to return to the Self Certificates screen.. The new Certificate will appear
in the Active Self Certificates list.
Figure 90: Self Certificate Request (2)
Figure 91: Upload Self Certificate
"
") to a new document in a text editor such as
108