TRENDnet TW100-BRV304 User Manual page 135

Allow Remote
Access
To connect from a remote PC via the Internet
1. Ensure your Internet connection is established, and start your Web Browser.
2. In the "Address" bar, enter "HTTPS://" followed by the Internet IP Address of the
TW100-BRV304. If the port number is not 80, the port number is also required. (After the
IP Address, enter ":" followed by the port number.)
e.g.
HTTPS://123.123.123.123:8080
This example assumes the WAN IP Address is 123.123.123.123, and the port number is 8080.
connect, as explained above.
This allows you to restrict remote access by IP address. Select the
desired option.
•
Everyone - Remote user's IP address is not checked.
•
IP address range - Only IP addresses in the range specified will
be allowed. If selected, you must enter the Start and Finish IP
addressses.
•
Only this PC - Only the specified IP address is allowed. If
selected, you must enter an IP address in the field provided.
Other Features and Settings
131