TRENDnet TW100-BRV304 User Manual page 111

Upload Certificate
New Request
Button
Requesting a Self Certificate
The TW100-BRV304 must generate a request for the CA. This request must then be supplied
to the CA. The procedure is as follows:
1. On the Self Certificates screen, click the New Request button to view the first screen of the
Self Certificate Request procedure, shown below.
2. Complete this screen.
Name
Subject Name
Hash Algorithm
Signature Algorithm
Signature Key Length
IP address
Domain Name
E-mail Address
3. Click "Next" to continue to the following screen.
After you have received a Certificate, use this to upload the certifi-
cate to the Broadband VPN Router.
You must select the correct certificate request, so the Broadband
VPN Router can correctly match the request and the certificate.
Use this to generate a new request to be supplied to a CA (Certifica-
tion Authority). See the following section for details.
Figure 89: Self Certificate Request (1)
Enter a name which helps to identify this particular certifi-
cate. This name is only for your reference, it is not visible to
other people.
This is the name which other organizations will see as the
Holder (owner) of this Certificate. This should be your
registered business name or official company name. Gener-
ally, all Certificates should have the same value in the
Subject field.
Select the desired option.
Select the desired option. RSA is recommended.
Select the desired option. Normally, 1024 bits provides
adequate security.
Enter your public (Internet) IP address.
This is optional. If you have a domain name, enter it here.
This is optional. If you have permanent E-mail address,
enter it here.
Microsoft VPN
107