TRENDnet TW100-BRV304 User Manual page 96

TW100-BRV304 User's Guide
8. Enter the Source IP address and the Destination IP address.
•
Since this is the outgoing filter, the Source IP address is "My IP address" and the
Destination IP address is the address range used on the remote LAN.
•
Ensure the Mirrored option is checked.
9. Click "OK" to save your settings and close this dialog.
10. On the resulting screen (above), ensure the "To DUT" filter is selected, then click the
Filter Action tab to see a screen like the following
Figure 61: Filter Properties: Addressing
Figure 62: New Rule Properties: IP Filter List
92