16.13 Accessories; 16.14 Documentation - Endress+Hauser Dosimass IO-Link Operating Instructions Manual

Dosimass IO-Link
Pressure Equipment
Directive
External standards and
guidelines
Additional certification
Standard documentation
Measuring instrument
Dosimass
Endress+Hauser
• With the marking
a) PED/G1/x (x = category) or
b) PESR/G1/x (x = category)
on the sensor nameplate, Endress+Hauser confirms compliance with the "Essential
Safety Requirements"
a) specified in Annex I of the Pressure Equipment Directive 2014/68/EU or
b) Schedule 2 of Statutory Instruments 2016 No. 1105.
• Devices not bearing this marking (without PED or PESR) are designed and manufactured
according to sound engineering practice. They meet the requirements of
a) Art. 4 Para. 3 of the Pressure Equipment Directive 2014/68/EU or
b) Part 1, Para. 8 of Statutory Instruments 2016 No. 1105.
The scope of application is indicated
a) in diagrams 6 to 9 in Annex II of the Pressure Equipment Directive 2014/68/EU or
b) Schedule 3, Para. 2 of Statutory Instruments 2016 No. 1105.
• EN 60529
Degrees of protection provided by enclosures (IP code)
• EN 61010-1
Safety requirements for electrical equipment for measurement, control and laboratory
use
• EN 61326-1/-2-3
EMC requirements for electrical equipment for measurement, control and laboratory use
• CAN/CSA C22.2 No. 61010-1-12
Safety Requirements for Electrical Equipment for Measurement, Control and Laboratory
Use, Part 1: General Requirements
• ANSI/ISA-61010-1 (82.02.01)
Safety Requirements for Electrical Equipment for Measurement, Control and Laboratory
Use – Part 1: General Requirements
CRN approval
Some device versions have CRN approval. A CRN-approved process connection with a CSA
approval must be ordered for a CRN-approved device.

16.13 Accessories

Overview of accessories available to order →  49

16.14 Documentation

For an overview of the scope of the associated Technical Documentation, refer to the
following:
• Device Viewer (www.endress.com/deviceviewer): Enter the serial number from the
nameplate
• Endress+Hauser Operations app: Enter serial number from nameplate or scan
matrix code on nameplate.
Brief Operating Instructions
Documentation code
KA01688D
Technical data
65