Safety; Symbols Used; Warnings - MICRO-EPSILON combiSENSOR KSB6430-PROFINET Operating Instructions Manual

Safety

1. Safety
System operation assumes knowledge of the operating instructions.
1.1

Symbols Used

The following symbols are used in these operating instructions:
Indicates a hazardous situation which, if not avoided, may result in minor or moderate injury.
Indicates a situation that may result in property damage if not avoided.
Indicates a user action.
i
Indicates a tip for users.
1.2

Warnings

Disconnect the power supply before touching the sensor surface.
> Risk of injury due to static discharge
Connect the power supply and the display/output device according to the safety regulations for electrical equip-
ment.
> Risk of injury
> Damage to or destruction of the sensor and/or the controller.
Avoid shocks and impacts to the sensor and/or the controller.
> Damage to or destruction of the sensor and/or controller.
The supply voltage must not exceed the specified limits.
> Damage to or destruction of the sensor and/or controller.
Protect the cables against damage.
> Damage to sensor
> Failure of the measuring device
combiSENSOR KSB6430 PROFINET Page 5