MICRO-EPSILON combiSENSOR KSB6430-PROFINET Operating Instructions Manual page 24

Operation
Rising edge (gate). Starts measured value output with set data rate as soon as the
rising edge is present at the trigger input. Another rising edge stops the output of
measured values or switches it on again.
Fig. 16 Rising edge trigger (U ), relevant digital signal (D
There is no factory-set triggering, the controller starts transmitting data as soon as it is switched on.
combiSENSOR KSB6430 PROFINET
)
0
U
I
D
0
t
t
Page 24