MICRO-EPSILON combiSENSOR KSB6430-PROFINET Operating Instructions Manual page 44

Anhang| Integration into TIA Portal
Enter the device name for identification in the PN network.
Switch to the Device view, double-click your KSB6430-PROFINET and set its device name in the Inspection window
(Properties > General tab).
i
This is one of several possibilities to change the device name.
Fig. 21 Assigning a device name
i
The device name is used to identify the device on the PN network and as an address; it must be unique across the entire sys-
tem.
combiSENSOR KSB6430 PROFINET Page 44