♦ % of Utilization This shows the percentage of available bandwidth each port is using over the
amount of time specified by the update interval. For example, when a 100 Mbps port is relaying
packets at 50 Mbps, the utilization is 50%.
Port Utilization
The information is described as follows:
♦ Update Interval
Suspend.
♦ Last Detected Source Address The MAC address of the last device that sent packets over this
port.
148
Figure 7-43. Port Utilization window
Choose the desired setting: 5 seconds, 15 seconds, 30 seconds, 60 seconds or
Stackable NWay Ethernet Switch User's Guide
Web-Based Network Management