Stackable NWay Ethernet Switch User's Guide
Console
Figure 7-41. Configure Console window
This window allows you to choose the refresh rate in the Console Timeout field (2 minutes, 5 minutes, 10
minutes, 15 minutes or Never). Select the protocol for communicating through the console port, Console
or SLIP, in the Serial Port field. Use SLIP for out-of-band management. If SLIP is being used, you may
also set the Baud Rate in the last field. Click Apply and then reboot the Switch for console port settings
to take effect.
The default serial port settings are:
♦ Baud Rate=9600
♦ Data Bits=8
♦ Flow Control=X on/X off
♦ Parity=None
♦ Stop Bits=1
146
Web-Based Network Management