D-Link DES-3624 Series User Manual page 74

and its own VIDs. If there is a match, the port will receive the packet. If the packet doesn't have a VLAN tag
or the port is not a member of the VLAN for which the packet is tagged, the packet will be discarded.
Note: If a port is a member of a trunk group but is not the anchor, the items shown in the above table
will be read-only and the values will be the same as those for the anchor port.
Choose Configure Port VLAN ID (PVID) to access the second item on the 802.1Q VLAN Configuration
menu. The following screen appears:
This screen allows you to set a Default port VLAN ID number (PVID) for each port. Press APPLY to let the
changes take effect.
Note: If a port is a member of a trunk group but is not the anchor, the items shown in the above table
will be read-only and the values will be the same as those for the anchor port.
Choose Configure Port GVRP Settings to access the third item on the 802.1Q VLANs Configuration
menu. The following screen appears:
78
Figure 6-38. Port VLAN (PVID) Assignment screen
Stackable NWay Ethernet Switch User's Guide
Using the Console Interface