Save Changes; Login On The Switch Console By Registered Users - D-Link DES-3624 Series User Manual

Stackable NWay Ethernet Switch User's Guide

Save Changes

The Switch has two levels of memory normal RAM and non-volatile or NV-RAM. Settings need to be changed
in all screens by pressing Ctrl + S. When this is done, the settings will be immediately applied to the
switching software in RAM, and will immediately take effect. Some settings, though, require you to restart
the Switch before they will take effect. Restarting the Switch will erase all settings in RAM and reload them
from the NV-RAM. Thus, it is necessary to save all settings to the NV-RAM before restarting the Switch.
In order to retain any modifications made in the current session, it is necessary to choose Save Changes
from the main menu. The following screen will appear to indicate your new settings have been processed:
Figure 6-4. Save Changes screen
After the settings have been saved to NV-RAM, they will become the default settings for the Switch, and they
will be used every time it is powered on, reset or rebooted. The only exception to this is a factory reset, which
will clear all settings and restore them to their initial values listed in Appendix D, which were present when
the Switch was purchased.

Login On The Switch Console By Registered Users

To log in once you have created a registered user,
1. Type in your username and press <Enter>.
2. Type in your password and press <Enter>.
3. The main menu screen will be displayed based on your Administrator or Normal User access level or
privilege.
46 Using the Console Interface