Save Settings To Tftp Server - D-Link DES-3624 Series User Manual

Stackable NWay Ethernet Switch User's Guide
Figure 6-48. Ping Test screen
After filling in the fields above, press START to initiate the Ping test.
The fields you can set are:
♦ Destination IP Address The IP address of the device to be Pinged.
♦ No. of Pings Amount of times the Switch should send the Ping (1-255). If zero is chosen, the Switch will
continue Pinging indefinitely.
In the lower part of the Ping Test screen, you can view the Result of the ping test.

Save Settings to TFTP Server

Choose Save Settings to TFTP Server from the Utilities menu (under System Utilities on the main
menu) to access the following screen:
88 Using the Console Interface